Description
The Bowral is the biggest studio in the range: six metres of warm cedar, with room for a guest suite, a home office for two, or a studio you won’t want to leave.
It arrives flat-packed as pre-made panels, so it goes up in a couple of days, not weeks. Here’s what goes into it, and what to know before it arrives.
In numbers
- 17.6 m² of floor inside the walls
- 3 layers in every wall panel
- 219 km/h wind rating
- 11–15 hours to put up, without the floor
- 1,110 kg for the whole kit
Why Western Red Cedar
It grows on Canada’s west coast and comes from managed working forests, harvested at a rate set to last. It’s light, it insulates better than any other common softwood, and it barely moves or warps as the weather changes. Natural oils in the timber help it resist rot and insects, so it’s rated very resistant to decay.
A roof that stays dry
A Colorbond steel gable roof with overhanging eaves and built-in gutters. Custom flashings seal every seam, and reflective foil insulation goes under the roof sheets as you build, so the steel doesn’t pour summer heat into the room. Monument or Surfmist comes standard, or pick any Colorbond colour above.
Inside the walls
The walls come as pre-made panels, two to four to a wall depending on its length, that simply join to each other with Tek screws. Every wall panel is made of three layers on a treated pine frame. That makes it stronger than cladding alone, keeps out moisture and heat, and leaves a smooth wall inside that you can paint straight away or cover with the wall lining kit.
- Cedar 18 mm VJ boards, outside
- Foil layer keeps out moisture and heat
- Structural ply 3 mm, smooth inside
- Frame 70 × 35 mm LOSP treated pine
Doors and windows
Lockable aluminium and glass double doors and two lockable aluminium awning windows, all with premium hardware. Extra windows sit in the middle of a wall panel, and most panels can swap places, so you choose where they go: just tell us in the order notes.
Where it can go
The Bowral comes without a floor. On a flat concrete slab or paving, fix it down with one concrete anchor at every panel join. On sloping or soft ground, add the subfloor kit: treated pine joists and yellow tongue flooring on H4 posts that you concrete into the ground. Very steep site? Tell us and we’ll talk about longer posts. Add the spotted gum deck for somewhere to sit in the sun.
Putting it together
- Level the site Find a flat spot, or set the subfloor posts.
- Floor The walls line up along its edges.
- Walls Stand the pre-made panels and screw them together.
- Roof Built on the ground, lifted on in sections.
- Doors and windows The doors come pre-assembled.
- Trims Corner posts, cover strips, fascias and ridge capping.
About 11 to 15 hours for two people, not counting the floor. A cordless impact driver makes it quicker than a drill. The instruction manual walks you through every step, or tick Installation above and we’ll build it for you in most of Australia.
Finishing the cedar
Choose one of the four painted colours and it arrives ready. Raw cedar is yours to finish: coat the panels on the ground before you build (a long-handled roller is quickest) and recoat every 3 to 5 years. Stains keep the grain showing. Paint needs a primer first, because cedar is porous. Left bare, cedar weathers to silver-grey within about a year but stays sound for many years.
Good to know
In New South Wales, a garden building of up to 20 m² can usually go up without council approval. In South Australia the limit is 15 m², and in the other states it is 10 m². Conditions apply, such as no kitchen or bathroom and enough space from the boundary and other buildings. The Bowral has 17.6 m² inside. Rules vary, so check with your local council before you order. Plans for a concrete slab come with the kit.
Sizes
- Outside the walls: 6048 × 3188 mm
- Inside the walls: 5860 × 3000 mm
- Roof, eaves to eaves: 6360 × 3488 mm
- Height to the ridge: 2865 mm
- With the subfloor: 3005 mm high
- Wall height: 2160 mm
- Door opening: 1910 × 1380 mm
- Slab size: 6000 × 3140 mm
- Space around the slab: 300 mm
- Kit weight: 1110 kg









Reviews
There are no reviews yet.